CRAFT Tech’s Dr. Balaji Muralidharan will be speaking at the Advanced Modeling and Simulation Seminar, hosted by the Computational Aerosciences Branch at the NASA Advanced Supercomputing facility. The talk is titled “Towards a Generalized Approach for Acoustically Adapted Synthetic Turbulence Generation at Zonal Hybrid RANS/LES Interfaces,” and will be held on Thursday, July 8th, 2021 […]
Archive | Events
Commercial Supersonic Transport Combustor Design Tool Presented at 2020 AIAA Propulsion and Energy Forum
NOx is a key emission metric for Commerical Supersonic Transport (CST). CRAFT Tech has developed a tool as a foundation for operational capability to perform trade studies and design optimization of CST combustors. Title: A Multi-Time-Scale Flamelet Progress Variable Approach in OpenNCC for Predicting NOx Applied to Commercial Supersonic Transport Combustor Designs Authors: Andrea C. […]
CRAFT Tech At The 2019 ASME Turbo Expo
CRAFT Tech will be organizing a session and presenting at the 2019 ASME Turbo Expo in Phoenix, AZ. Dr. Kevin Brinckman will be presenting on “Numerical Simulation of Non-Equilibrium Condensation in Supercritical CO2 Compressors.” Dr. Ashvin Hosangadi will be organizing the same session: “Compressors for sCO2 Power cycles – near-critical Point considerations.” This session will […]
2019 AIAA SciTech
CRAFT Tech will be presenting at the 2019 AIAA Science and Technology Forum and Exposition in San Diego, California. Tim Weathers will be discussing his recent work in molecular dynamics. Date: Wednesday January 9, 2019 at 11:30 am Title: Characterizing Thermodynamic Properties of Pure Components and Binary Mixtures at Rocket Conditions Using Molecular Dynamics Session: Transport and […]
Pointwise User Group Meeting 2018
CRAFT Tech will highlight recent efforts to develop an advanced real-fluid numerical framework for modeling trans-critical CO2 spanning both supercritical and sub-critical regimes. Specifically, the framework is applied to an experimental compressor configuration that was tested at Sandia National Laboratories. CRAFT Tech’s Jeremy Shipman will discuss the development of TREX unstructured meshes that were constructed […]
2018 AIAA Joint Propulsion Conference
CRAFT Tech will be well represented at the 2018 Joint Propulsion Conference in Cincinnati, Ohio (July 9-11). We will be presenting in three different topic areas Numerical Framework for Simulation of Propulsive Systems at Sub-Critical Conditions presented by Dr. Ashvin Hosangadi Application of a Progress Variable Based Approach For Modeling Non-Premixed/Partially Premixed Combustion Under High-Pressure […]
The 6th International Supercritical CO2 Power Cycles Symposium
CRAFT Tech’s Dr. Ashvin Hosangadi will be presenting at The 6th International Supercritical CO2 Power Cycles Symposium: March 27-29, 2018. The topic of his talk is: “Numerical Simulations of CO2 Compressors: Subcritical Inlet Conditions.” A generalized numerical framework to model phase change at subcritical conditions in CO2 over a wide range of conditions has been […]
Upcoming Webinar With Pointwise: Design Optimization of a Big Wave Surfboard
CRAFT Tech’s Stephen Barr will be presenting his design optimization work in a webinar hosted by Pointwise. The live webinar will take place on Tuesday, April 25th, at 11AM EDT. Mr. Barr, along with Travis Carrigan from Pointwise, will discuss the various tools used to design a better-performing big wave surfboard, including CRUNCH CFD and […]
Pointwise User Group Meeting – 2014
Jeremy Shipman will be representing Combustion Research and Flow Technology, Inc. at the 2014 Pointwise User Group Meeting. His talk is titled, “Computational Aeroacoustic Analyses for Military Aircraft Applications.” The presentation will be held on Thursday, October 30th at 3:15PM PDT. This presentation will highlight recent activities at CRAFT Tech involving the computational simulation of […]
AHS Forum (May 20-22, 2014)
Dr. Vineet Ahuja and Dr. Chandrashekhar Kannepalli presented at the AHS 70th Annual Forum in Montréal, Québec. May 22, 2014 – 4:30PM – Technical Session E Unsteady Blade Shape Optimization for Rotorcraft Vineet Ahuja, Chandrashekhar Kannepalli, Andrea Zambon and Hadassah Lapin, Combustion Research and Flow Technology, Inc.; Mark Potsdam, US Army