Skip to content

ASME Turbo Expo 2016: June 13-17, Seoul, South Korea

Paper entitled: LES Predictions of Jet Noise for a Pylon-Mounted Dual Stream Nozzle and Jet Surface Interactions Authors: Patrick Vogel, Jonghoon Bin and Neeraj Sinha https://www.asme.org/events/turbo-expo An end-to-end LES/FW-H noise prediction model has been demonstrated and validated with acoustic and…

RPFM Release 5.5.0

The next version of RPFM is now available!  Release Notes for version 5.5 are below: Allow user to choose any number of processors Grid based load-balancing for multi-processor runs Improvements to stability and convergence of high altitude extensions up to…

CRAFT Tech Wins ANSYS 2016 Hall of Fame Competition

Combustion Research and Flow Technology, Inc. (CRAFT Tech) was just named a corporate winner of the 2016 Hall of Fame Competition by ANSYS. Dr. William Calhoon of our Huntsville office led the project to develop an advanced, computationally efficient turbulent…

2015 Propulsion Energy Conference

Several representatives from CRAFT Tech will be participating and presenting at the 51st AIAA/SAE/ASEE Joint Propulsion Conference, July 27-29 in Orlando, Florida. Dr. Vineet Ahuja will be chairing the Propellant Storage and Management sessions I and II on Monday and…

AHS Forum (May 20-22, 2014)

Dr. Vineet Ahuja and Dr. Chandrashekhar Kannepalli presented at the AHS 70th Annual Forum in Montréal, Québec. May 22, 2014 - 4:30PM - Technical Session E Unsteady Blade Shape Optimization for Rotorcraft Vineet Ahuja, Chandrashekhar Kannepalli, Andrea Zambon and Hadassah…

Upcoming Conference – AHS Aeromechanics (Jan. 22-24, 2014)

CRAFT Tech will be presenting at the upcoming AHS Aeromechanics Specialists' Conference in San Francisco, CA. Unsteady Blade Shape Optimization Toolkit for Rotorcraft Vineet Ahuja, Chandrasekhar Kannepalli, and Andrea Zambon from CRAFT Tech and Mark Potsdam from US Army. The…

Upcoming Conference – AIAA SciTech (Jan. 13-17, 2014)

CRAFT Tech will be at the 2014 AIAA Science and Technology conference. We will be presenting some of our latest innovations in combustion, aeroacoustics, and design optimization. 13 - 17 January 2014 Location: National Harbor, Maryland Venue: Gaylord National Acoustic Source Localization…

Webinar on CFD Pump Analysis

CRAFT Tech, CEI, and Pointwise hosted a joint webinar on September 12th at 11AM EDT. Our own Jeremy Shipman will discuss how to use CRUNCH CFD for predicting cavitation and far-field noise in a high-energy water injection pump. This webinar will cover the…

Recent CRAFT Tech Publications…

Two papers presented at the 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit are: "Numerical Simulations of Instabilities in Single-Hole Orifice Elements" and "Transient Simulations of Rotordynamic Problems with Whirling Motion."
Back To Top